Polyester Resin


How To Use

Unscrew the cap from the cartridge and screw on the static mixer nozzle. Fit the cartridge into the applicator gun and gradually apply pressure to the trigger until the material exudes from the end of the nozzle. You should always waste the first 10ml or so of resin until you get an even colour. Insert the nozzle into the hole & gun the material out, removing the nozzle slowly as the hole fills up. Once sufficient resin is in the hole, release the pressure from the gun and place the stud to be fixed into the hole with a twisting action to ensure full contact between hole, resin & stud. Allow resin to cure fully before loading. Please see label on cartridge for full installation instructions.

Get In Touch

Unit 3, Red Shute Hill Industrial Estate
Hermitage
Thatcham
Berkshire
RG18 9QL

UK: 0845 2600 190
Overseas: +44(0)1672 812 900

More »

Policies